Strapping Skidded Coils. placement of coils: Eye to the sky (center of the coil is facing up and down, coil is resting flat on the side) or eye to the side (center of the coil is facing sideways, coil is resting on the circular edge). each coil must be secured by: • the coils, if placed into groove, should have a minimum clearance of 20 mm from the bottom: (i) a means (e.g., timbers, chocks or wedges, a cradle, etc.) to prevent the coil from rolling. place horseshoe strap through the eye of the front coil to prevent forward movement of the coils. after loading the coil on the truck in the approved location, check the pallet and banding to make sure they are secure and in good condition. blocking between 2 coils simple to be done with two pieces (f) between (e) of each coil. how to properly secure your skidded coils. This is for security and safety reasons. these two shipping types are named for the position of the center or “eye” of the coil: Small and narrow coils can be placed like drums close to each other. We generally use an x or a. Using rubber belting, use one 4″ strap. Blocking to end wall of the container can be.
from www.hhmetalsource.com
these two shipping types are named for the position of the center or “eye” of the coil: • the coils, if placed into groove, should have a minimum clearance of 20 mm from the bottom: after loading the coil on the truck in the approved location, check the pallet and banding to make sure they are secure and in good condition. Tarp the load securely as required. Blocking to end wall of the container can be. Using rubber belting, use one 4″ strap. how to properly secure your skidded coils. This is for security and safety reasons. placement of coils: each coil must be secured by:
strappingcoil H&H Metal Sources
Strapping Skidded Coils after loading the coil on the truck in the approved location, check the pallet and banding to make sure they are secure and in good condition. Eye to the sky (center of the coil is facing up and down, coil is resting flat on the side) or eye to the side (center of the coil is facing sideways, coil is resting on the circular edge). each coil must be secured by: Blocking to end wall of the container can be. placement of coils: (i) a means (e.g., timbers, chocks or wedges, a cradle, etc.) to prevent the coil from rolling. these two shipping types are named for the position of the center or “eye” of the coil: how to properly secure your skidded coils. Tarp the load securely as required. This is for security and safety reasons. We generally use an x or a. place horseshoe strap through the eye of the front coil to prevent forward movement of the coils. • the coils, if placed into groove, should have a minimum clearance of 20 mm from the bottom: after loading the coil on the truck in the approved location, check the pallet and banding to make sure they are secure and in good condition. blocking between 2 coils simple to be done with two pieces (f) between (e) of each coil. Using rubber belting, use one 4″ strap.